Calculate operational parameters for Berlin-Schoenerlinde

Source: R/calculate_operational_parameters_berlin_s.R

Calculate operational parameters for Berlin-Schoenerlinde

calculate_operational_parameters_berlin_s(
  df,
  calc_list = list(deltaSAK = "(1-SCAN_SAK_Ablauf/SCAN_SAK_Zulauf)*100", Ozoneintrag =
    "(C_O3_Zugas - C_O3_Abgas)*Q_Gas/Q_Ozonanlage"),
  calc_list_name = c("delta SAK", "Ozoneintrag"),
  calc_list_unit = c("%", "mg-O3/L"),
  calc_paras = c("SCAN_SAK_Ablauf", "SCAN_SAK_Zulauf", "C_O3_Zugas", "C_O3_Abgas",
    "Q_Gas", "Q_Ozonanlage")
)

Arguments

df

a data frame as retrieved by read_wedeco_data()
calc_list

list with calculation operations to be carried out (default: list(deltaSAK = "(1-SCAN_SAK_Ablauf/SCAN_SAK_Zulauf)*100", Ozoneintrag = "(C_O3_Zugas - C_O3_Abgas)*Q_Gas/Q_Ozonanlage"))
calc_list_name

full names of parameters to be used for plotting for each calculation specified wit 'calc_list'. default: c('delta SAK', 'Ozoneintrag')
calc_list_unit

units of parameters to be used for plotting for each calculation specified wit 'calc_list'. default: c("percent", "mg-O3/L")
calc_paras

a vector with parameter codes used for performing calculations defined in 'calc_list' (default: c("SCAN_SAK_Ablauf", "SCAN_SAK_Zulauf", "C_O3_Zugas", "C_O3_Abgas", "Q_Gas", "Q_Ozonanlage"))

Value

dataframe with calculated operational parameters

Examples

if (FALSE) {
raw_list <- read_wedeco_data()
myDat <- calculate_operational_parameters_berlin_s(df = raw_list)}